Non-slip coating of the running surface

[aminaas1576]

3.5 Noise control level

Treadmills inevitably make noise when in use due to the presence of a motor. Without careful selection, this can cause inconvenience. Currently, there are three common ways to reduce treadmill noise.

The first is to create a soundproof enclosure for the engine to reduce noise by wrapping it in a plastic casing.
The second is a running belt to absorb noise and vibrations; the thicker the running belt, the better it absorbs.
Third, reduce noise and vibration by installing an air belgium number data cushion damping system.
When purchasing, we can mainly pay attention to these three aspects, if these three aspects are done well, then the noise from the treadmill will not be very big.


3.6 Tilt adjustment

Incline adjustment is also known as "incline mode", "incline mode" is divided into two types: electric adjustment and automatic adjustment.
Electric adjustment can easily adjust the angle, not to mention automatic adjustment. However, automatic adjustment is mainly found in very expensive treadmills, most ordinary treadmills have electric adjustment.
The incline adjustment angle is generally 0-15 degrees, and some expensive brands have negative adjustment. But the price of such models is relatively high. In fact, for ordinary treadmill users, the need for simulating the ascent and descent is not very high. In contrast, the noise control level is more important.